Cyclone MBC
Would you like to react to this message? Create an account in a few clicks or log in to continue.

hayes nine breaks

2 posters

Go down

hayes nine breaks Empty hayes nine breaks

Post  zebardy 2008-05-14, 14:24

After breaking the pin off one of the pistons on my rear caliper I've managed to disassemble the caliper replace the piston and re assemble it. I have now just pent 2 hours trying to bleed my rear break with very little success (apart from redecorating a corner of the garage with break fluid, when the tube kept popping off the caliper valve :S). I now have no air coming out of either end of the system, yet the handle is still going back to the bar and the pistons are not moving Evil or Very Mad. Any tips help or advice would be greatly appreciated Smile.
zebardy
zebardy
XTR
XTR

Number of posts : 201
Age : 42
Bike : On-one 456 carbon
Registration date : 2008-04-28

Back to top Go down

hayes nine breaks Empty Re: hayes nine breaks

Post  N@th 2008-05-14, 14:54

Step by Step idiots guide here:

CLICKY CLICKY

There are little nooks in the resevoirs AND calipers on Hayes brakes, so make sure you continuously tap both of them with a spanner to release all the air.

But if you lever goes all the way in, there is still air in there. Keep going.
N@th
N@th
Chris King Ultimate Racer
Chris King Ultimate Racer

Number of posts : 902
Bike : BMX Aero Burner, CW handlebars, 2 finger brakes, layback seat post.
Registration date : 2006-10-26

Back to top Go down

hayes nine breaks Empty Re: hayes nine breaks

Post  zebardy 2008-05-15, 13:29

ok, so I've managed to get some more air out and the pistons are now moving a little (not enough but progress), however the bleed kit bottle has now developed a hole :S. this really shouldn't be this difficult! Know anywhere I can obtain a similar bottle (or a syringe would be a good idea). Thanks!
zebardy
zebardy
XTR
XTR

Number of posts : 201
Age : 42
Bike : On-one 456 carbon
Registration date : 2008-04-28

Back to top Go down

hayes nine breaks Empty Re: hayes nine breaks

Post  zebardy 2008-05-18, 09:43

right sorted it all out, the squeezy bottle you get in the bleed kit is useless! If you ever have to bleed a hayes 9 break go and buy a syringe! bleeding your breaks will then take about 5 minutes and be a walk in the park.
zebardy
zebardy
XTR
XTR

Number of posts : 201
Age : 42
Bike : On-one 456 carbon
Registration date : 2008-04-28

Back to top Go down

hayes nine breaks Empty Re: hayes nine breaks

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum