Cyclone MBC
www.cyclonembc.co.uk
 
HomeHome  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  RegisterRegister  Log inLog in  
Post new topic   Reply to topicCyclone MBC :: FORUM HELP
 Posting an image into threads.View previous topic View next topic Go down 
AuthorMessage
Cyclone Admin
Deore
Deore



Joined : 26 Oct 2006
Posts : 14

PostSubject: Posting an image into threads.   Thu Oct 26, 2006 2:57 pm
POSTING AN IMAGE:



1) To post an image like the one shown above you firstly need to find the image you want to link to on the Internet.

2) Once you have found the image, RIGHT click on the image and go down to PROPERTIES. Highlight the address (URL) and right click again and COPY the address.

3) Paste the address into this white message box like shown below:

http://www.cyclonemountainbikingclub.co.uk/img/tornado1.gif

4) Highlight the entire link and then click the " Image " button above.
This should put [img ] at the front of the link and [/ img] at the end.

5) Then preview the message and it should show the image.

6) If you wish to post a picture onto a thread which is on your PC, then send simply use ' image Shack ' CLICK HERE to simply and quickly upload the image and link to that. They even give you the link to cut and paste into forum messages. ( "Thumbnail for Forums (1) "
_________________
Cyclone Mountain Biking Club

Woburn Sands

www.cyclonembc.com
Back to top Go down
Posting an image into threads.View previous topic View next topic Back to top 
Page 1 of 1

Permissions of this forum:You cannot reply to topics in this forum
Cyclone MBC :: FORUM HELP-
Post new topic   Reply to topic